|
||
____________________________________ |
||
|| Tip Index || |
||
| Tip: For those of us who cannot get fresh cut wood and have to rely on seasoned stuff.. To replace the water in your wood, first steam your timber as for bending, then dunk it while hot into a bath of cold water, I use plastic plumbing pipe, as the timber cools it draws in the water, you may have to top up your tank as the timber cools, if you need more water in your timber, repeat the process a second time. Seal the ends and put aside until stabalizes and dries to the % that you would normally use it..the wood will now behave more like air dried timber.. K.P. 8/3/04 | ||
|
||
 |
